Accessories; Inserting Racks; Flat Rack - Bosch 300 Serie Manual De Uso

convection fan may also run during Fast Preheat and self-
clean.
Oven Bottom
The oven bottom conceals the lower heating element. As a
result the element is protected from damage and spills.
Note:
Do not place food directly on the oven bottom.
WARNING:
NEVER cover any slots, holes or passages in
the oven bottom or cover an entire rack with
materials such as aluminum foil. Doing so
blocks air flow through the oven. Aluminum
foil linings may also trap heat, causing a fire
hazard.

Accessories

Inserting Racks

CAUTION:
To avoid burns, place oven racks in desired
positions before turning oven on. Always use
oven mitts when the oven is warm. If a rack
must be moved while the oven is hot, do not
let oven mitts contact hot heating elements.
To avoid possible injury or damage to the
appliance, ensure flat rack is installed exactly
per installation instructions and not
backwards or upside down.

Flat Rack

Do not clean in the self-
clean oven.
Flat Rack
The rack is designed with a stop so it will stop before
coming completely out of the oven and not tilt.
Inserting Flat Rack into Oven:
Removing Flat Rack from Oven:
1. Grasp rack firmly on both sides and pull rack toward
you.
2. When the stop is reached, tilt rack up and pull the rest
of the way out.
1. Grasp rack firmly on
both sides.
2. Insert rack (see
picture).
3. Tilt rack up to allow
stop into rack guide.
4. Bring rack to a
horizontal position and
push the rest of the
way in. Rack should
be straight and flat,
not crooked.
English 5