Customer Settings - Bosch 300 Serie Manual De Uso

To set the Cook Time:
1. Set the cooking mode and temperature.
2. Press Cook Time.
"Cook Time", the corresponding arrow, and the default
time (30 minutes) appear in the display.
Cook
Time
3. Turn the Settings dial to change the default time as
necessary.
The oven starts after a few seconds. The oven can also
be started by pressing Cook Time.
The oven turns off and a beep sounds at the end of the
programmed time. "End" will appear in the display.
Open the oven door or turn the Cooking Mode dial to
"Off" position to turn off the beep sound.
Note:
• Cook Time can also be adjusted while the oven is
running.
• Cook Time may be adjusted when the arrow next to
Cook Time is lit.
• The maximum Cook Time setting is 23:59 hours.
• To cancel Cook Time, set it to zero.
Cook
Time

Customer Settings

The Customer Settings menu is used to customize the
oven settings.
The following settings can be adjusted:
Menu item
CS1: Clock 12-hour or 24-hour display
Mode mode
CS2: Buzzer 1 = Short (10 seconds)
Duration
2 = Medium (2 minutes)
3 = Long (5 minutes)
CS3: F = Fahrenheit
Temperature
C = Celsius
Unit
CS4: Display during Preheat
Displayed mode:
Temperature
C = Current Temperature
S = Set Temperature
CS5: This is where the time
Preferred displayed can be adjusted if
Time several times are running
simultaneously. To display
the other times, press the
corresponding touchpad.
1 = Clock is always displayed
2 = A running timer is always
displayed
3 = A running cook time is
always displayed
CS6: Buzzer Touchpad sound: Yes or No.
at Each Push
of a Key
CS7: Oven Sets the offset value. When
Temperature an offset value is selected,
Offset the actual oven temperature
is raised or lowered by this
(for single
value. This feature is useful if
and upper
food is consistently either too
ovens only)
brown or too light.
The range for changing the
offset is between +/- 35°F (+/
- 19°C). The temperature
changes by 1° increments.
Description Default
12h
2
F
S
1
Yes
0
English 9