Cleaning Of Cyclone And Container; Cleaning/Replacement Of Filter - Husqvarna DC 6000 Manual De Instrucciones

Cleaning of cyclone and
container
• Switch the machine to the off position.
• Loosen the clamping brackets for the lid to the cyclone
container.
• Loosen the hose connector to the filter container. Lift
the lid and remove the cyclone screw from the
container.
• Use compressed air or a brush to clean the cyclone
screw and container.
• Reinstall the cyclone screw in the container.
• Fit the lid and tighten it.
MAINTENANCE
Cleaning/replacement of filter
• Loosen the handle by loosening the knob.
• Loosen the hose connector to the filter container.
• Loosen the clamping brackets for the lid to the filter
container.
• Grasp the lower rim of the filter container and lift the
container out of its guide groove.
!
• Place the filter container on the floor and remove the
filter.
CAUTION! The filter container is heavy.
–
English 15