Troubleshooting Schedule; Troubleshooting - Husqvarna R 213C Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3. Make sure that the oil level in the transmission oil
tank is between the 2 horizontal lines on the tank.
Max

Troubleshooting schedule

If you cannot find a solution to your problems in this
owner's manual, speak to your Husqvarna service
agent.
Problem
The starter motor does not turn
the engine over
The engine does not start when
the start motor turns the engine
over
The engine does not run smooth-
ly
26
Min

Troubleshooting

Cause
The parking brake is not applied. See
page 14 .
The lift lever for the cutting deck is in mow position. See
8 .
The main fuse is blown. See
The ignition lock is defective.
The connection between the cable and the battery is bad. See
page 9 .
The battery is too weak. See
The starter motor is defective.
There is no fuel in the fuel tank. See
The spark plug is defective.
The ignition cable is defective.
There is dirt in the carburettor or fuel line.
The spark plug is defective.
The carburettor is incorrectly set.
The air filter is clogged. See
The fuel tank vent is blocked.
There is dirt in the carburetor or fuel line.
4. Fill with engine oil if the oil level is below the lower
line, but do not fill above the top line. See
data on page 29 for recommended oil.
To apply and release the parking brake on
To replace the main fuse on page 19 .
To charge the battery on page 20 .
To fill fuel on page 11 .
To clean and change the air filter on page 18 .
Technical
Start conditions on page
Battery safety on
854 - 003 - 14.11.2018

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

R 216

Tabla de contenido