Introduction; Equipment; Technical Data - ESAB Migmaster 215 Pro Instrucciones De Uso

GB
3

INTRODUCTION

Migmaster 215 Pro is step controlled power source in a compact design, intended
for welding with solid steel, stainless steel or aluminium wire as well as tubular wire
with or without shielding gas.
The possibility of welding with homogeneous wire/shielding gas and welding with
gasless tubular wire is obtained by switching the + and -- connections on the
machine front.
ESAB's accessories for the product can be found on page 40.
3.1

Equipment

The power source is supplied with:
Return cable 3m with return clamp
S
Shelf for gas cylinder
S
Instruction manual
S
4

TECHNICAL DATA

Voltage
Permissible load at
100% duty cycle
60 % duty cycle
20 % duty cycle
Setting range (DC)
Open circuit voltage
Open circuit power
Power factor at max load
Control voltage
Wire feed speed
Burnback time
Spot welding
Welding gun connection EURO
Wire dimension range
FCW
Max diameter/weight
of wire bobin
Dimensions lxwxh
Weight
Operating temperature
MM215Pe
Migmaster 215 Pro
208/230V, 1∼ 50/60Hz
110A
160A
250A
40A/16.0V--250A/26.5V
19.5--42V
200W
0.92
42V, 50/60Hz
55--748ipm (1.4--19m/min)
0--0.5s
0.4--3.5s
Fe .023--.045" (0.6--1.1mm)
Al .035--3/64" (0.9--1.2mm)
.030--.045" (0.8--1.1mm)
12" (300mm)/33lb (15kg)
33,8x16,5x28,7"
(860x420x730mm)
220lb (100kg)
14÷104F (--10 ÷ +40
Migmaster 215 Pro
208/230/460/575V, 1∼ 50/60Hz
110A
160A
250A
40A/16.0V--250A/26.5V
19.5--52V
320W
0.92
42V, 50/60Hz
55--748ipm (1.4--19m/min)
0--0.5s
0.4--3.5s
EURO
.023--.045" (0.6--1.1mm)
.035--3/64" (0.9--1.2mm)
.035--.045" (0.9--1.1mm)
12" (300mm)/33lb (15kg)
33x17x32,7"
(840x430x830mm)
304lb (138kg)
o
C) 14÷104F (--10 ÷ +40
- - 6 - -
o
C)