Playing Along To A Piano Song; Creating A Performance; Recording A Performance - Korg G1 Manual De Usuario

Turning on AB Repeat
1. Select the song that you want to use with AB Repeat.
2. Press the Play/Pause button to begin playback of the
song, and then press the Play/Pause again to pause
playback.
3. Specify the starting point (A).
1. While holding down the FUNCTION button, press
the PART 1 button.
A dot appears beside the number of the left side of
the display to indicate the starting point (A).
2. Use the SELECT and buttons to go to the mea-
sure that you want to specify as the starting point (A).
The display returns to show the current measure in
about 2 seconds.
4. Specify the end point (B).
1. While holding down the FUNCTION button, press
the PART 2 button.
A dot appears beside the number of the right side of
the display to indicate the end point (B).
2. Use the SELECT and buttons to go to the mea-
sure that you want to specify as the end point (B).
The display returns to show the current measure in
about 2 seconds.
5. Start AB Repeat.
1. While holding down the FUNCTION button, simul-
taneously press the PART 1 and PART 2 buttons.
The FUNCTION button blinks, and AB Repeat en-
ters standby.
2. Press the Play/Pause button to begin playback.
A dot will appear in the display when a repeat location is
reached during AB Repeat playback.
For example, if the fifth measure is the starting point (A),
" " appears in the display, and, if the ninth measure
is the end point (B), "
AB Repeat is not cancelled when the song is stopped.
Turning off AB Repeat
1. Press the Play/Pause button to pause the song.
2. Cancel AB Repeat.
While holding down the FUNCTION button, simul-
taneously press the PART 1 and PART 2 buttons. The
FUNCTION goes dark, and AB Repeat is cancelled.

Playing Along to a Piano Song

Muting a Part
With Piano Songs, the left hand is usually assigned to Part 1
and the right hand to Part 2. By muting one of the parts, the
G1/G1 Air will only play one of the parts—or hands—and
you can play the muted part. The part you play is up to you.
1. To mute the left-hand part, press the PART1 button. To
mute the right-hand part, press the PART2 button.
The button for the muted part will go dark (unlit).
Play along with the song.
2. To Press the button of the muted part a second time to
un-mute that part.
The button will light up again.
The volume of the muted part can be adjusted in the
Function Mode. Refer to "Song: Volume of muted part"
on page 13.
" appears in the display.

Creating a Performance

The G1/G1 Air features an onboard recorder so you can eas-
ily create, record, and playback your own performances.
The recorder provides two parts. You can use record one
part, then add a second part, and play a third part live on
the keyboard as those parts playback, or you can use each
part to record a separate song.
Your recorded performances can be saved as User Songs—
until the maximum number of songs or maximum num-
ber of measures has been reached, or until the data storage
space of the G1/G1 Air is full.
If you record to a part where data has already been
recorded, the previous performance data will be de-
leted and overwritten with the new performance data.
Therefore, before recording to a part, be sure it does not
contain any data that you wish to save.

Recording a Performance

Recording a New Song
1. Press the Record button.
The G1/G1 Air will enter the recording standby mode,
and the Record button will blink.
The next empty User Song number will appear in the
display.
If nothing has been recorded, "
data storage space is full, "
delete unnecessary songs before recording using the
Function Mode (see page 13).
The PART 1 button will blink.
2. If you wish to record Part 2 instead, Press the PART 2
button; the PART 2 button will now blink.
3. Recording will begin immediately when you play
a note on the keyboard. Or, you can press the Play/
Pause button to receive a two-measure count-off be-
fore recording begins.
If you wish to record to the metronome, press the MET-
RONOME button. Recording can also start in response
to a MIDI message (refer to "About MIDI" on page 14).
4. To stop recording, press the Stop, Play/Pause, or Re-
cord buttons.
The PART button for the recorded part will remain lit.
Adding a performance to a saved song
A performance in Partner Mode (see page 11) cannot
be added to a saved song.
1. Press the Play/Pause button to display the Song number.
2. Use the SELECT and
of the User Song that the recording is to be added to.
Buttons for recorded parts light up, and buttons for
parts with nothing recorded go off.
3. To add the recording at the beginning of the song,
hold down the Record button.
The G1/G1 Air will enter the recording standby mode,
and the Record button will blink.
To add the recording to the middle of the song,
press the Play/Pause button to play back the song,
and then press the Play/Pause button to pause after
reaching the measure where you want to add the
recording. The desired measure can also be reached
" appears. If the
" appears. In this case,
3,4
4
1,4
2
buttons to select the number
9