Performing With Another Person (Partner Mode) - Korg G1 Manual De Usuario

1. Press the SPLIT button.
The SPLIT button lights up, and the abbreviation for the
current bass sound name appears in the display.
2. Press the SPLIT button to access the available Bass
Sounds.
The abbreviation for the bass sound name appears in the
display.
The selected sound remains the same, even if a different
sound button is pressed.
1,2
Abbreviation Sound name
Acoustic Bass + Any sound
Electric Bass + Any sound
Acoustic Bass & Cymbal + Any sound
The # column shows the number of oscillators, or voices,
used to create a single note for that sound. (refer to "About
maximum polyphony" on page 16.)
Using pedals
In Split Mode, the pedals affect only the right side of the
keyboard. They have no effect on the left side of the key-
board (bass notes).
Changing the Upper Keyboard Sound
In the Split Mode, changing the sound assigned to the up-
per part of the keyboard is the same as selecting a new
sound in the Single Mode.
Changing the Split Point
To change the dividing point between the upper and lower
portions of the keyboard in the Split Mode, simply hold
down the SPLIT button and press any key on the keyboard.
The split point appears in the display while the button is
held down.
The sound range used by the higher section of the keyboard
starts with the key to the right of the one that was pressed.
The split point remains the same for all three sounds se-
lected with the SPLIT button.
Returning to the Single Mode
To return to Single Mode, press the SPLIT button several
times; the button will go dark.
Split Mode Settings
In Split Mode, adjusting the volume balance between
sounds and shifting the octave for each sound, can be per-
formed from the Function Mode (starting with the "Split
Mode: Volume balance" function on page 13).
Performing with another person
(Partner Mode)
Two people can play in the same range with the keyboard
divided in half between them. This is called the Partner
Mode.
1. While no song is being played back, press the FUNC-
2. Press the FAVORITE button.
3. Press the TEMPO + or – button (at the right side of the
#
The Partner Mode is turned on, and the selected sound is
1 +
used for both the left and right sides of the keyboard.
2 + When the Partner Mode is turned on, the SPLIT button
blinks.
2 +
The right side of the keyboard, from E4 to C8, produces
sounds two octaves lower in pitch (E2–C6).
The left side of the keyboard, from A0 to E
sounds two octaves higher in pitch (A2–E
A0
Pitches A2 to E 6 for the player
on the left side
Different sounds can be selected for the left and right sides
of the keyboard.
The sounds for the left side and right side are applied in the
order that their buttons are pressed, and the abbreviation
for the Sound name of the left side appears in the display.
For example, if the sound from the G.PIANO button is to
be applied to the left side and the sound from the OTH-
ERS button is to be applied to the right side, hold down the
G.PIANO button, and then press the OTHERS button.
Previously, each Sound Button should have been used in
the Single Mode to select the correct sound.
To use the same sound for both the left and right sides of
the keyboard, press only one sound button.
Damper Pedal Assignments
In the Partner Mode, the Soft pedal acts as a damper pedal
for the left side of the keyboard; the Damper pedal acts as
the damper pedal for the right side of the keyboard.
The Sostenuto pedal has no function in Partner Mode.
Partner Mode Settings
Range for higher section In Partner Mode, adjusting the volume balance between
of keyboard
sounds and shifting the octave can be performed from the
Function Mode (starting with the "Partner Mode: Volume
balance" function on page 13).
TION button.
The FUNCTION button will light.
" " will appear in the display.
display); " " appears in the display.
Ｅ 4 E4
Pitches E2 to C6 for the player
on the right side
♭
4, produces
♭
6).
C8
11