Invacare Etude Medley Manual Del Usuario página 19

3) The upper side rail bar is installed according to illustration G.
4) The gliding system in the opposite end are installed onto the upper side rail bar
according to illustration H.
5) The side rail bar is raised until an audible click can be heard.
Please be sure, that the gliding system has engaged properly into the first hole.
(see illustration F and I).
6) The lower pawl is unfolded and the lower side rail bar is installed onto the pawl
according to illustration E and j.
7) The lower pawl in the opposite end unfolded (see illustration E)
and the lower side rail bar is then installed onto the lower pawl.
Again, please ensure that pawls and gliders are completely engaged.
(See illustration K).
8) The locking finger screws are installed and tightened.
9) On the Etude Medley low version, please set one warning sticker
on each end of the lower pawls of the full length side rails.
The 4 stickers are put in the bed ends packaging.
13
G
H
I
CLICK!
j
K