General - Invacare Etude Medley Manual Del Usuario

Congratulations
You have chosen an Invacare
Invacare that are designed to be dismantled.
®
Invacare is certified according to DS/EN ISO 9001 and ISO 13485 which ensures that our customers are always
®
supplied with products of uniform quality.
Throughout the entire production process our materials/products are quality controlled by the operators. Additionally,
a final test is carried out prior to packaging and shipping.
To identify the product please look at the Product-label.
If the product does not correspond to the quality demands of
, it will be discarded.
Invacare
®
If, contrary to our expectations, a problem should arise in connection with the delivered product, please contact your
Invacare supplier. An address list is shown on the back side on this manual. Invacare
®
product specifications without prior notice.
Invacare accepts no liability for any use, change or assembly of the product other
®
than as stated in this user's manual.
Accessories not mentioned in this manual must not be used.

1. General

• The Etude nursing bed has been developed for domestic care and features a comfortable sitting and lying
position for the patient. Furthermore, ergonomical operation for the carer is ensured.
The bed is not intended for hospital use.
• The Etude bed is marked with the CE - mark in accordance with directive 93/42/EEC concerning Medical
Apparatus.
• The Etude bed has been tested and approved according to EN 1970:2000 and EN 60601-2-38 + A1:2000.
(EN 60601-2-38 + A1:2000 only according to the domestic care regulations).
• The motors and control of the Etude bed have been approved according to EN 60601:1996-03.
• The Etude bed has been approved and marked with the TÜV mark.
• The Etude bed has undergone a risk analysis according to EN ISO 14971:2001-03.
• The control unit, external power supply and motors are protected according to IP X4.
• The hand control unit is protected according to IP X4.
• Max. weight: 180 kg
• Max. patient weight: 145 kg (provided that the weight of the mattress and the accessories do not exceed 35 kg).
Important! The max. load of the bed must not be exceeded.
• If the patient height exceeds 2 meters it is recommended to use a mattress support extension.
• The cabling consists of flexible cables with plugs at both ends, to ease replacement.
• The bed is not intended for children under 12 years and psychiatric patients.
• Remove the plug from the mains voltage before moving the bed. The cable must be kept clear off the floor and the
castors during transportation.
• The adjustment area of the mattress support is: 40-80 cm or alternatively 33-73 cm. In standard or on low version
22-62 cm or alternatively 29-69 cm.
• The angle between the lower leg section and horizontal is adjustable from 0º to 15º.
Etude Medley nursing bed. Etude Medley are home nursing beds manufactured by
®
INVACARE EC-HØNG A/S Østergade 3 DK-4270 Høng Denmark
Tel: +45 58 85 27 22 Fax: +45 58 85 43 86
ETUDE.ME300.M0
Type nr.:
Serial no: 377236
19-2006
Date:
Version/
Code:
®
6
Uin 230V
5 700040 023575 Iin max. 1A
Uout 24V
Int. 10% max. 6min/h
IP54
reserves the right to alter
± 10% 50 Hz
, max. 70VA