Fitting The Accessories - Invacare Etude Medley Manual Del Usuario

4. Fitting the accessories

(see illustration 3 in front of the users manual)
Fitting the steel side rail
The side rail must be mounted with the release system at the head end of the bed.
The fork links on the side rail must be mounted according to
the instruction on the side rail.
Tighten the side rail with 2 finger screws.
Fitting the side rails
The installation of steel- and wooden side rails are identical
1) The gliding system consists of 3 different parts which all
must be installed simultaneously.
A disassembled gliding system is shown in illustration A.
The two pawls are clipped onto the glider (B and C).
2) For a ergonomic working position and easier assembly,
raise the bed to 1/3 of full height position. The gliding system
of one bed end is guided into the bed end according to
illustration D and E.
D
1)
2)
12
0 - 6 cm
1)
Glider
Pawl
B: Removal
F
CLICK!
25 cm or more
2)
A: Disassembled
gliding system
C: Installation
CLICK!
E