Remington IPL6000 Guía De Uso Y Cuidado página 24

Using the i-Light Pro IPL System Every Time
SKIN TONE SENSOR LED
will be blinking orange
1. Turn the POWER SWITCH on. The
SKIN TONE SENSOR LED will flash
ORANGE. You will hear a series of
audible "BEEPS" every 5 seconds to
remind you to take the test. For safety
reasons, after 30 seconds of inactivity,
the audible "BEEPS" will increase in
frequency until the test is taken or the
machine is turned off.
2. Always place the skin tone sensor
window directly on the area of skin
you plan to treat. The reading will take
place automatically.
Note: You must use the Skin Tone Sensor
to test color on each body part you plan
to treat.
24