Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
4. PLacE HaND PIEcE ON aREa TO BE
TREaTED (see page 28)
SKIN CONTACT SENSORS
• If SKIN CONTACT SENSORS are NOT
in contact with skin the system will
"buzz" and will not operate if you
press the FLASH BUTTON. Double
check that the contact sensors are in
full contact with the skin.
• If CONTACT SENSORS are in full
contact with skin the system will
"CHIRP" and is ready to flash
• If you're having trouble, try pressing
the hand piece firmly against the skin
5. TREaT YOuR SKIN (see page 28-31)
• After you hear the "CHIRP" press the
FLASH BUTTON to treat skin
• When a flash is delivered, you will:
– See a bright flash of light
– Hear a "POP" sound
(the disposable cartridge)
– Feel a mild sensation of
warmth and tingling
• LIFT the HAND PIECE off the skin and
move it to a new treatment area
• DO NOT flash the same treatment spot
multiple times during one session
• Try to treat in a GRID PATTERN
Note: DO NOT physically mark the
treatment area with grid pattern as this
could cause injury to the skin.
Note: This guide is intended to be a quick
reference for experienced users of the
i-Light Pro. If this is your first time using
the i-Light Pro it is critical that you read
the entire Use and Care Guide for com-
plete directions for important contraindi-
cations, warnings, benefits and risks and
detailed use instructions.
9
Publicidad
Tabla de contenido
