Remington IPL6000 Guía De Uso Y Cuidado página 38

Troubleshooting
PROBLEM POSSIBLE
CAUSE
A light flash You have not
is not waited enough
emitted time between
when I press flashes for the
the FLASH bulb to recover.
BUTTON.
The DISPOSABLE
CARTRIDGE has
flashed 1,500
times and needs
to be replaced.
You should see
the Light Bulb
flashing YELLOW.
Cartridge has
misflashed.
The cartridge is
damaged.
WHAT YOU SHOULD DO
The system requires about 2 seconds to recover
between flashes. When your i-Light Pro system is
ready to flash (and assuming the SKIN CONTACT
SENSORS are flush against the skin), the system will
emit three "BEEPS" to confirm that it is ready to flash.
Make sure that the CARTRIDGE STATUS INDICATOR
LIGHT is either solid green or solid yellow. If it is
flashing yellow, disconnect the system and replace
the DISPOSABLE CARTRIDGE. Refer to "Replacing the
DISPOSABLE CARTRIDGE" on page 33.
Occasionally the cartridge may misflash. Attempt to flash
5 more times. If still no flash, disconnect the system and
replace the DISPOSABLE CARTRIDGE. Refer to "Replacing
the DISPOSABLE CARTRIDGE" on page 33.
If the unit emits a "chirp" but does not flash the disposable
cartridge may be damaged. Disconnect the system and
replace the DISPOSABLE CARTRIDGE. Refer to "Replacing
the DISPOSABLE CARTRIDGE" on page 33.
38