Setting The Energy Level - Remington IPL6000 Guía De Uso Y Cuidado

Using the i-Light Pro IPL System Every Time
Notes:
• Some areas are darker than others.
You must use the skin sensor on each
different area you intend to treat.
• If you feel the SKIN TONE SENSOR
has not made a proper reading, you
may try again after 5 seconds. If you
believe your skin is suitable based on
the Skin Tone chart on page 11 but the
SKIN TONE SENSOR will not enable the
system, contact Customer Service (see
page 44).
• If you have gotten a sun tan since the
last time you used the system, your
skin may be too dark to treat. You may
need to wait until the sun tan fades to
continue your hair removal treatments.
Use the SKIN TONE SENSOR to deter-
mine if the area is too dark to treat.
• For safety reasons, the system will
re-lock after 5 minutes of inactivity.
If you take a break in the middle of a
treatment, or if you turn off the system,
you will need to use the SKIN TONE
SENSOR to unlock the IPL again.

Setting the Energy Level

Energy Level Selection Display lights
determine the intensity of the light flash
delivered to your skin, from the lowest
level (*) to the highest level (*****). Higher
levels improve hair removal results, but
may be less comfortable. To get the best
results, you should use the highest setting
that's comfortable.
There are 5 energy level settings on
the i-Light Pro system. Whenever the
i-Light Pro IPL system is turned on, the
device is automatically set to the lowest
energy level and only one ENERGY LEVEL
INDICATOR SELECTION light will be on
(ENERGY LEVEL 1 in the table on page
27). To modify the energy level, press the
ENERGY LEVEL SELECTION BUTTON to
increase the energy level. Once the
energy level has reached level 5,
pressing the ENERGY LEVEL SELECTION
BUTTON will return the system to energy
level 1. The number of ENERGY LEVEL
SELECTION DISPLAY lights will coincide
with the change in energy level.
26