Getting The Best Results - Remington IPL6000 Guía De Uso Y Cuidado

Getting the Best Results

• Shave immediately before treating the
area. Doing this will let you use a higher
energy level, because there will be less
hair to heat up and the treatment will be
more comfortable. How well you shave
will make a big difference in how the
treatment feels. See page 23.
• Use the highest energy level setting
that's comfortable for you. Higher energy
levels are more effective. See page 26.
• Have a plan to work each treatment
area in an organized, grid-like pattern to
ensure that you don't overlap treatment
spots.
Note: DO NOT physically mark the
treatment area with grid pattern as this
could cause injury to the skin.
• If you've waxed, tweezed or epilated the
hair in the treatment area, wait 6 weeks
before using the system. IPL uses the
hair under your skin to disable your hair
follicles, so it is not effective if the hair
has been pulled out.
• Stick with the full treatment for
each body area.
cleaning
After each session, it is recommended
that you clean your system, especially
the HAND PIECE, the FLASH WINDOW, the
SKIN CONTACT SENSORS, and the SKIN
TONE SENSOR window.
DO NOT place any part of the device
in water or other liquids. If any part of the
device gets wet, DO NOT uSE. Contact
Customer Service (see page 44) for help.
As with any electrical device, a wet sys-
tem could cause electrocution or electric
shock.
• Make sure the device is turned off.
Remove the POWER CORD from the
BASE UNIT and Wall Socket before
cleaning.
• Use a clean, lint-free cloth (one is
provided with the unit) to gently wipe
the surface and especially the NOSE
CONE, FLASH WINDOW, SKIN CONTACT
SENSORS and the SKIN TONE SENSOR
window. If needed, you can dampen the
32