Remington IPL6000 Guía De Uso Y Cuidado página 35

Ocultar thumbs Ver también para IPL6000:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3. Grasp the NOSE CONE with one hand
while pressing both NOSE CONE
RELEASE BUTTONS with the other
hand and pull gently. Set the NOSE
CONE in a safe location taking care not
to damage the FLASH WINDOW and
other components.
5. Push the new DISPOSABLE CARTRIDGE gently
into place, taking care not to touch the LAMP
TUBES or damage the pins
on the cartridge. Note: the DISPOSABLE
CARTRIDGE must be oriented so that
the side with 4-pins is on the left, and the
side with 1-pin is on the right.
4. Grasp the DISPOSABLE CARTRIDGE
and gently pull away from the HAND
PIECE. Discard the used cartridge in
accordance with local regulations.
WARNING: Ensure cartridge has cooled
for 5 minutes before handling. Exercise
care when replacing cartridge.
6. Gently push the NOSE CONE back into
the HAND PIECE making sure both
sides click into place. Note: the longer
tab (with gold circuits) must be on top
to properly fit.
35

Publicidad

Tabla de contenido
loading

Tabla de contenido