Remington IPL6000 Guía De Uso Y Cuidado página 41

PROBLEM
Dirt or debris
is stuck to the
window.
The Cool Down
Mode Indicator
icon is flashing
yellow and the
system is
beeping.
POSSIBLE
CAUSE
The i-Light Pro system
needs to be cleaned.
The hand piece needs
some time to cool down.
Under normal operating
conditions this is an
uncommon occurrence.
However this situation
can arise if either the
hand piece or base unit
become too hot.
The room is too warm. Use the system in a cooler environ-
WHAT YOU SHOULD DO
See page 32 for instructions on how
to clean your IPL system. If you still
can't get it clean, contact Customer
Service (see page 44) for help.
Wait for a few minutes for the system
to cool down. There is no need to
shut the unit down, as the Cool Down
Mode Indicator light will turn off when
the i-Light Pro IPL system is ready to
use again.
ment, where the temperature is less
than 80° F or 27° C.
41