Auger Brake - Stihl BT 131 Manual De Instrucciones

WARNING
Never remove the cap by turning it
directly to the open position. First allow
the power tool to cool adequately and
then release any residual pressure by
slowly turning the cap approximately
1/2 turn counter-clockwise. Never
attempt to remove the cap while the
engine is still hot or running.
Refueling
Take care not to spill fuel while fueling
and do not overfill the tank – leave
approximately 1/2" (13 mm) air space.
Closing
WARNING
An improperly tightened fuel filler cap
can loosen or come off and spill
quantities of fuel. To reduce the risk of
fuel spillage and fire from an improperly
installed fuel cap, tighten the fuel filler
cap by hand with as much force as
possible:
BT 131
If your fuel cap still does not tighten
N
properly, it may be damaged or
broken. Stop using the power tool
and take it to your authorized STIHL
dealer for repair or replacement.

Auger Brake

Engaging the Auger Brake
A
Move the activating lever to
N
position A .
when starting
–
at idling speed
–
to unwind a trapped auger
–
If the auger snags on an obstacle in the
hole (e.g. roots or stones) the machine
will begin to turn counterclockwise – the
activating lever is pressed against the
operator's thigh and thus engages the
auger brake.
English
15