F: Satin Stitch Foot; C: Overedge Foot; B: Buttonhole Foot; Quilter - Sears Kenmore 385.16524000 Manual De Instrucciones

Presser Foot Types (continued)
• Satin stitch foot (Foot F)
Use this foot for satin stitch and outlining applique.
For:
Darning (page 46)
Satin stitch (page 48)
Monograming (page 50)
Applique (page 50)
Shell stitch (page 60)
Decorative stitch of geometric patterns (page 64)
Twin needle stitches (page 66)
Smocking (page 70)
Decorative stretch patterns (page 74)
Foot F:
Prensatetas F:
Pied F:
J
• Oversdge foot (Foot C)
This foot is specially constructed for stitching and/or
overcasting seams. The small brush and wire guides help
control the fabric, hold the raw edge in place and keep it
from puckering, especially when sewing on knit fabrics.
For:Overcasting (Page 54)
Overedge stitch (Page 64)
Serging (Page 72)
Herring bone stretch (Page 74)
• Buttonhole foot (B)
Use this foot for manual buttonholing.
It is marked to help you measure your buttonholes
accurately.
For:Manual buttonhole (page 84)
• Quilter
The quilter will help to keep the stitching lines straight.
For:Quilting (page 40)
S
Foot C:
Prensatetas C:
Pied C
Foot B:
Prensatelas B:
Pied B
Quilter:
Acolchador:
Guide a matelasser:
J
j/
14