Installation - PRESIDENT HENRY Classic Manual Del Usuario

Welcome to the world of the new generation of CB radios. The new PRESI-
DENT range gives you access to top performance CB equipment. With the
use of up-to-date technology, which guarantees unprecedented quality,
your PRESIDENT HENRY ASC from the new "Classic" line is a new step in
personal communication and is the surest choice for the most demanding
of professional CB radio users. To ensure that you make the most of all its
capacities, we advise you to read carefully this manual before installing
and using your PRESIDENT HENRY ASC.
A) INSTALLATION
1) WHERE AND HOW TO MOUNT YOUR MOBILE CB RADIO
a) You should choose the most appropriate setting from a simple and practical point
of view.
b) Your CB radio should not interfere with the driver or the passengers.
MOUNTING
DIAGRAM
c) Remember to provide for the passing and protection of different wires (e.g. power,
antenna, accessory cabling) so that they do not in any way interfere with the driving
of the vehicle.
d) To install your equipment, use the cradle (1) and the self-tapping screws (2) provided
(drilling diameter 3.2 mm). Take care not to damage the vehicle's electrical system
while drilling the dash board.
e) Do not forget to insert the rubber joints (3) between the CB and its support as these
have a shock-absorbing effect which permits gentle orientation and tightening of
the set.
f) Choose where to place the microphone support and remember that the microphone
cord must stretch to the driver without interfering with the controls of the vehicle.
26