Corghi EXACT 70 Manual De Uso página 73

Eichstädt Elektronik - Professionelle Kfz-Diagnosegeräte
First note the number of the Sim Card (5 figures) and the
name of the aligner:
• go to the assistance menu of the aligner and select the item
Smartcard management
• or from the main page (LOGO) pressing CAP+F12.
In order to update the databank of the aligner, it is
necessary to have a DATABANKCARD and a com-
puter connected to the Internet.
Activate the receipt of the cookies in the browser that
will be used to download the updates.
REGISTRATION
A. Open the browser (Internet Explorer, Mozilla
Firefox) and go to the page:
www.corghi.com/infoauto
B. Select the language and continue with the regis-
tration, clicking on the registration link.
C. On the registration page, fill in all the fields
marked with the symbol "*" (the others are
optional).
D. At the end of the registration, continue with the
login using the username and password cho-
sen.
LOGIN AND DOWNLOAD OF VEHICLE CARDS
A. Open the browser (Internet Explorer, Mozilla
Firefox etc.) and go to the page:
www.corghi.com/infoauto
B. Insert the username and password.
C. The page for selecting the reference market will
open. Select the market.
D. At this point, the vehicle/lorry selection page
opens. Select the make and model of the vehicle
you want, and proceed. 1 credit will be subtracted
from the card.
E. The vehicle card will open, and here it is possible
to set the diameter of the rim and read the data
regarding the characteristic angles of the chosen
vehicle. At the bottom of the page there are two
links to download the file.
F. Downloading XML file: the Vehicle Card is
converted in a file that will be imported into the
aligner.
Click on the link and save the file on a remov-
able support. Save the file downloaded onto
the aligner PC in the folder ROOT " C:\ " or "
D:\ ".
G. Downloading PDF file: The PDF file of the vehicle
card is opened. It is necessary to have a PDF
file reader. This file can be saved and printed.
The reference data will then be entered into the
aligner databank "by hand".
(4) Preparation for wheel
alignment
Information for preparing the vehicle for checking
Operator's Manual EXACT 70
and adjustment of its wheel alignment in accordance
with the manufacturer's instructions. The program
step is automatically activated if this information
is in the databank.
To access this function from the rest of the program
select the
The step is only active if it is set in the set-up or
operation with toe values in units of length has
been selected.
Set the rim diameter of reference to work with toe
values in millimetres or inches.
values in a pre-set list.
angle unit of measurement selected in the set-up
will be set.
Runout compensation or ROC is used to compensate
any geometrical errors in the rim (runout and plane
error) and errors in fitting the clamps. The compensa-
tion skip option is available if set in the set-up.
Apply ballast to the vehicle as instructed and select
the RUNOUT compensation method required.
The screen shows the databank references for the
selected vehicle.
for the adjustment.
Complete display of the databank values is available
in the DATABANK DATA SUMMARY
The values which depend on input of the chassis
height values are only shown after these values
http://www.eichstaedt-elektonik.de
(5) Diameter input (fig.35)
icon or the F10 key.
reference rim diameter stated in databank
rim diameter set by the operator.
and scroll through the diameter
to do the job in angle measurements. The
(6) Compensation (fig.36)
indicates that the angle is adjustable.
indicates that a help function is available
EN
.
73