Job Record; Toe Curve Adjustment; Adjusting The Engine Cradle; Free Wheel Toe Adjustment Procedure - Corghi EXACT 70 Manual De Uso

Eichstädt Elektronik - Professionelle Kfz-Diagnosegeräte
PRINT PRELIMINARY CHECKS. The pre-
liminary check reports are printed.
ALPHANUMERIC PRINT (standard).
VEHICLE SITUATION GRAPHIC PRINT.
CHASSIS SITUATION GRAPHIC PRINT.

JoB rECorD

From the printing stage, access the job record using
the icon. Use of the job record instead of
selection of the vehicle from the databank can also
be set in the set-up.
Another setting that can be made in the set-up is
the type of job record to be used.
Fill in the job record by using the keys as described
in the "DATABANK MANAGEMENT" section.
The compulsory fields are highlighted.
WARNING
When a customer or vehicle is selected from those
already on file, the relative data are loaded in the
job record (e.g., when a vehicle is selected by
means of the registration number, the customer
and the vehicle saved in the vehicle record are
automatically loaded). These data overwrite those
entered previously, so the selected vehicle may be
modified in the databank.
when a new value is entered in the REG.N., CHASSIS
and CUSTOMER fields, a new record is automatically
opened for data input.
when the job done is saved, the vehicle and cus-
tomer records are also automatically updated.

ToE CUrVE ADJUSTmENT

This procedure is used to check the variation in
the toe when the vehicle's wheel alignment is
modified.
Operator's Manual EXACT 70
Locate the front axle adjustment screen and select
the pop-up menu above the
icon (press the up arrow to open the menu). Click
on the
Follow the procedure.
Procedure used for adjusting the position of the
engine cradle, useful for obtaining even front camber
distribution by adjusting the cradle position.
Locate the front axle adjustment screen and select
the pop-up menu above the
icon (press the up arrow to open the menu). Click
on the
Follow the procedure.
ADJUSTmENT ProCEDUrE
On some vehicles, access to the toe adjustment
registers is difficult. This procedure allows the front
toe values to be adjusted with the wheels locked
to an angle, with no need to remove and replace
the steering wheel holder. Locate the front axle
adjustment screen and select the pop-up menu
above the
http://www.eichstaedt-elektonik.de
"Toe Curve" icon.
ADJUSTING THE ENGINE
CrADLE
"Cradle Adjustment" icon.
FrEE wHEEL ToE
"front axle" icon (press the
"front axle"
"front axle"
EN
79