Eichstädt Elektronik - Professionelle Kfz-Diagnosegeräte
• provide the workshop's electrical system with
a grounding circuit in good working order.
- In order to prevent the equipment being used by
unauthorised personnel, it is advised to discon-
nect the power supply plug when the equipment
remains idle (switched off) for long periods of
time.
- If the equipment is connected directly to the
power supply by means of the main electrical
board without the use of a plug, a key switch or
device with padlock fixture must be provided
to restrict use of the equipment to authorised
personnel only.
WARNING
A good grounding connection is essential for cor-
rect operation of the equipment.
NEVER connect the earth wire to a gas or water
pipe, telephone wire or any other unsuitable
objects.
WARNING
Before connecting the power supply plug to the
power panel make sure that the line voltage is
the same as the power supply indicated on the
machine data plate.
SAFETY rEGULATIoNS
The equipment is intended for professional use
only.
WARNING
Only one operator may work on the equipment
at a time.
WARNING
Failure to comply with the instructions and danger
warnings may cause serious injury to operators
and to others in the vicinity.
Before starting up the equipment, always ensure
you have read and understood all the danger/warn-
ing signs in this manual.
Only qualified, authorised operators are capable
of using this equipment correctly. In order to be
classified as skilled, operators must be capable of
understanding the written instructions provided by
the producer, and be trained and familiar with the
safety rules and labour regulations.
Operator's Manual EXACT 70
Operators must not use the equipment under the
influence of alcohol or drugs which may affect their
capacity. In all cases, it is essential to:
- Be able to read and understand all the informa-
- Have a thorough knowledge of the capabilities
- Keep unauthorised persons well clear of the area
- Make sure that the equipment has been installed
- Make sure that all system operators are suit-
- Not touch power lines or electrical equipment
- Read this manual carefully and learn how to use
- Always keep this operator's manual in a place
Do not remove or deface the Attention, Warning
or Instruction decals. Replace any missing or il-
legible decals. Missing or damaged decals can be
obtained at your nearest Corghi dealer.
- when using and carrying out maintenance on the
- Unauthorised alterations or changes to the equip-
During work and maintenance operations, always
tie up long hair and do not wear loose or floppy
clothing, ties, necklaces, wristwatches or any
other items that may get caught up in the mov-
ing parts.
http://www.eichstaedt-elektonik.de
tion in this manual.
and characteristics of this equipment.
of operations.
in compliance with all the relevant legislation and
standards.
able trained, that they are capable of using the
equipment correctly and safely and that they are
adequately supervised during their work.
without first making sure that the power supply
has been disconnected.
the equipment correctly and safely.
where it can be readily consulted and to consult
it whenever appropriate.
WARNING
equipment, observe the standardised industrial
accident prevention regulations.
ment relieve the constructor of all liability for any
consequent damage or accidents. In particular,
tampering with or removing safety devices con-
stitutes a breach of Safety at work Regulations.
WARNING
EN
55