Mounting The Bar And Chain (Quick Chain Tensioner) - Stihl MS 171 Manual De Instrucciones

Mounting the Bar and Chain
(quick chain tensioner)
Removing the chain sprocket cover
1
3
Swing grip (1) into position (until it
N
engages)
Turn the wing nut (2) to the left until
N
it hangs loosely in the chain
sprocket cover (3)
Remove chain sprocket cover (3)
N
Mounting the tensioning gear
Remove and reverse tensioning
N
gear (1)
MS 171, MS 181, MS 181 C, MS 211, MS 211 C
Remove screw (2)
N
2
Position tensioning gear (1) and
N
guide bar (3) relative to one another
1
Insert and tighten screw (2)
N
2
1
3
2
Releasing the chain brake
Pull hand guard towards the front
N
handle until it engages audibly –
chain brake is released
Fitting the saw chain
1
WARNING
Put on protective gloves – risk of injury
by the sharp cutters.
English
29