Product Description; Tools Needed - ROTOR INPOWER Serie Manual De Usuario

1. PRODUCT DESCRIPTION

1.1. OPTION A: COMPLETE INpower CRANKSET
Non-drive-side crank assembly (crank + axle) contains the power meter unit and specific
ANT+ sensor ID number.
Drive-side crank assembly (crank + spider) includes drive-side bolt, washer and
selfextractor nut specific to INpower.
ATTENTION: DO NOT REMOVE THE DRIVE-SIDE BOLT AND SELF-EXTRACTOR NUT.
Unlike the drive-side bolt on ROTOR cranks without the power meter, the INpower bolt and
self-extractor nut is joined to the right crank and should not be disassembled. See the section on
installing and removing the cranks to learn more about this process.
TOOLS NEEDED: left and right INpower crank assembly requires the use of the following
tools:
- 8 mm allen wrench.
- 2 mm allen wrench.
Power meter LEFT
Non-drive-side crank assembly
WARNING: DO NOT DISASSEMBLE
Drive-side crank assembly
WARNING: DO NOT DISASSEMBLE
Product description 37