Maintenance - ROTOR INPOWER Serie Manual De Usuario

8. MAINTENANCE

Inspect your ROTOR product for damage including cracks, dents and serious scratches
before each ride and after every fall or crash.
Do not use your ROTOR product until it has been thoroughly inspected, repaired or
replaced.
Cyclists should inspect their bicycle and parts on a regular basis or consult with a
professional bicycle mechanic to determine the need for service and to detect damage that
may have occurred from normal use.
Check the bolts and other fasteners periodically for tightness. Ensure they are tightened to
the correct torque values.
Never use high pressure cleaning equipment or chemical products to clean ROTOR
INpower.
"Waterproof level: IPX7".
Do not try to disassemble any electronic ROTOR INpower part, the seal could be damaged
and this invalidates the warranty.
In case of any electronic failure, service must be performed at an authorized ROTOR
technical service center.
Continuing to use damaged parts may lead to loss of control and cause serious injury or
death.
WARNING!
Maintenance 55