Battery; Battery Replacement - ROTOR INPOWER Serie Manual De Usuario

6. BATTERY

6.1. INSTALLATION AND SPECIFICATIONS
ROTOR INpower is powered by one standard AA battery (not included).
Estimated riding time: 300 hours*.
The battery must be installed correctly, with the positive "+" facing outward, and should have
enough charge for use. The battery's charge level can be
checked with any computer or ANT+™ compatible device. The
type of battery and the polarity are printed on the inner side of
the battery cover. The battery charge can be checked by any
computer or bike device compatible with ANT+™.
The battery cover should only be removed when it's necessary to change the battery or when
uninstalling the cranks. Repeated opening can damage the internal contacts and O-ring (OR-24x1.5
NBR).
Do not extract any part from the inner side of the battery
cover. The battery cover parts are assembled as shown
left.
Be careful when turning the battery cover to prevent any
damage to the internal contacts and the seal.
*Tests performed with alkaline batteries from leading
brands. Consumption in fast mode (active only when
connected to the User Software running on a computer) is greater, thus reducing the hours of autonomous
use.

6.2. BATTERY REPLACEMENT

6.2.1. Open the battery cover by turning it counterclockwise and aligning the tab with the opened
lock image pictured on the crank cap. You can use the tab to easily turn the cover.
6.2.2. To remove the cover and battery, do not use any tools or sharp objects, the spring will expel
the battery.
6.2.3.
Insert the new battery in its place, with the positive side facing toward the outside.
Battery
50