Pairing - ROTOR INPOWER Serie Manual De Usuario

3. PAIRING

Connect your ROTOR INpower with any device that's ANT+™ compatible.
For a complete list of ANT+™ certified products, visit:
http://www.thisisant.com/directory/
Read the ANT+™ device manual for further instructions.
Pairing can be done both automatically or using the manual mode (recommended when other
ANT+™ power meters are close).
Before pairing ROTOR INpower with a monitor, make sure you are at least 10 meters (30 feet)
away from any other ANT+™ power sensor. This will prevent accidental pairing with another
power sensor.
The ROTOR INpower retains its "SENSOR ID" throughout battery replacements and will remain
properly paired.
3.1. ACTIVATION PROCESS
3.1.1. To minimize battery consumption, the system is activated by applying a force to the pedals
of at least 2.5 kg. Riding a few meters is sufficient.
3.1.2.
Your ROTOR INpower is sending a radio signal and is ready to be paired and measure
data.
3.2.a. AUTOMATIC PAIRING
Once INpower is active and within two minutes of activation (INpower enters sleep mode after
two minutes), push the "SCAN" button on your ANT+™ device at the ANT+™ Power screen.
The "SCAN" button is usually placed in the menu:
Settings\Bike settings\Bike profiles\"Your profile"\ANT+ Power.
Wait for confirmation from the monitor.
Pairing
46