To Stop Playback; To Pause Playback - Teac CD-RW890MKII Manual Del Usuario

total number of the tracks
The disc type indicator shows the type of disc currently loaded .
CD:
A commercial pre-recorded CD
CD-R:
A finalized CD-R
CD-RW:
A finalized CD-RW
CD-R :
NO TOC
A CD-R which has yet to be finalized
CD-RW :
NO TOC
A CD-RW which has yet to be finalized
< As for non-audio discs, the content may be detected but will not
be played .
< When no disc is inserted, "NO DISC" appears .
4
Press the PLAY (y) button to start playback.
Disc playback starts from the first track .
< If you load the disc, and then press the Play (y) button without
closing the disc tray, the disc tray closes automatically and
playback starts .
< When the track number changes during playback of continuous
music such as live performances, the sound may be cut then
played .

To pause playback

Press the Pause (J) button during playback . Playback stops at the
current position . To resume playback, press the Play (y) button or
the Pause (J) button .
disc type indicator
total play time of the disc

To stop playback

Press the Stop (H) button to stop playback .
To skip to the next or previous track
During playback, repeatedly press the Skip (.or/) button
until the desired track is found . You can also skip to next or
previous tracks rapidly by holding down the Skip (.or/)
button of the remote control unit . The selected track will be
played from the beginning .
In the stop mode, press the Skip (.or/) button repeatedly
until the track you want to listen to is found, and press the Play (y)
button to start playback from the selected track .
< When the . button is pressed during playback, the track
being played will be played from the beginning . To return to the
beginning of the previous track, press the . button twice .
< During programmed playback, the playback skips to the previous
or next track in the program .
Search for a part of a track
During playback, hold down the Skip (. or /) button of
the main unit and release it when the part you want to listen to is
found .
Use the Search (m or ,) button when operating with the
remote control unit .
11