Teac CD-RW890MKII Manual Del Usuario página 15

3
When the selection of track numbers has been finished,
press the Play (y) button to start program playback.
The "PROGRAM" indicator stops blinking and lights up . Playback of
the program starts .
To check the programmed order
In the stop mode, press the PROGRAM CHECK button repeatedly to
show the track numbers that have been stored in memory .
< This cannot be used while the "PROGRAM" indicator blinks .
To add a track to the end of the program
1
Press the PROGRAM button in the stop mode.
2
Press the numeric button to select a track.
track 7:
track 10:
The track is added to the end of the program .
To overwrite the program
1
In the stop mode, press the PROGRAM button repeatedly
until the program number to be changed appears on the
display.
2
Press the numeric button to select a track.
track 7:
track 10:
The track is overwritten to the selected track .
Continue to the next page
15