Connections - Teac CD-RW890MKII Manual Del Usuario

CAUTION:
< Switch off the power to all equipment before making connections .
< Read the instructions of each component you intend to use with this unit .
< Be sure to insert each plug securely . To prevent hum and noise, avoid bundling
the signal interconnection cables together with the AC power cord .
DIGITAL OUT
CD Player, MD Deck, etc.
A
DIGITAL IN terminal
To record digital audio signals, connect this terminal to the digital output terminal of a
digital device such as a CD player with a commercially available optical digital cable .
B
ANALOG IN/OUT jacks
Analog 2-channel audio signal is input or output from these jacks . Connect these jacks to
the amplifier with RCA cables .
C
AC Power Cord
After all other connections are complete, connect the plug to the AC wall socket .
Be sure to connect the power cord to an AC outlet which supplies the correct voltage .
Hold the power plug when plugging or unplugging the power cord . Never pull or yank
on the power cord .
< If the unit will not be used for a long period of time, unplug the power cord .

Connections

A B
R L R L
REC PLAY
Amplifier
Amplifier
CD-RW890MK@
q CD-R (TAPE) PLAY
ANALOG OUT
q CD-R (TAPE) REC
ANALOG IN
Make sure to connect:
white plug q white jack (L: left channel)
red plug q red jack (R: right channel)
CD-RW890MK "
C
AC Outlet
7