Status Bar - Ecler MOSC FX Manual De Instrucciones

6.2.3. Status Bar

The status bar displays the current "system status".
Stored / Unstored Status
This cell gives the storing status of the current effect parametering. "Not Stored" means the present effect
set-up displayed on the edi:lab window is not stored in the MOSC FX: if you leave the edi:lab application, the
MOSC FX will not keep this parameter set-up. "Stored" means the present effect set-up displayed on the edi:lab
window as already been loaded on the module: if you leave the edi:lab application, the MOSC FX will keep this
parameter set-up.
BPM Status
This cell gives the Beat Per Minute sequence value recognized by the system. The value by default is
120BPM.
Undo button
This button reloads the last effect configuration "Stored" by the system.
Yes eliminate the last modifications made on the current effect, and reloads the latest "Stored" configuration.
No aborts the "Undo" procedure.
Mixer Load button
This button loads the current effect set-up on the MOSC FX.
Yes loads the current effect configuration on the MOSC FX (except module controls TIME and PARAMETER).
The loaded effect configuration is now the module default set-up and will replace the original factory settings. To
come back to original factory effect settings, use the "Restore" scroll menu.
No/Cancel aborts the "Undo" procedure.
15