Publicidad
Jp
The Lens Hood
En
The lens hoods protect the lens and block stray light that would
otherwise cause flare or ghosting.
De
Fr
Es
When attaching or removing the hood, hold it near the
Sv
its base and avoid gripping it too tightly. Vignetting may occur if the
hood is not correctly attached.
Ru
The hood can be reversed and mounted on the lens when not in use.
When the hood is reversed, it can be attached and removed by rotating
Nl
it while holding it near the lock mark (
Pt
Built-in Flash Units
When using the built-in flash on cameras equipped with a built-in
Pb
flash unit, shoot at ranges of 0.6 m (2 ft) or more and remove the lens
hood to prevent vignetting (shadows created where the end of the
lens obscures the built-in flash).
It
Camera
Cz
D800 series (DX format)
Sk
D700 (DX format)
Ro
Ua
D7000/D300 series/D200
Ck
D100
Ch
D90/D80/D70 series
D5100/D5000/D3100/
Kr
D3000/D60/D40 series
Id
20
Focal length
50 mm or more
28 mm or more
50 mm or more
50 mm or more
50 mm or more
50 mm or more
D50
50 mm or more
Align the lens hood lock mark (— ) with
the lens hood mounting mark ( ) on the
lens (e).
).
—
18 mm
3.0 m (9 ft 10 in.) or more
28 mm
1.0 m (3 ft 3 in.) or more
18 mm
3.0 m (9 ft 10 in.) or more
28 mm
1.0 m (3 ft 3 in.) or more
28 mm
1.5 m (4 ft 11 in.) or more
28 mm
2.5 m (8 ft 2 in.) or more
1.0 m (3 ft 3 in.) or more
1.0 m (3 ft 3 in.) or more
28 mm
2.0 m (6 ft 7 in.) or more
1.0 m (3 ft 3 in.) or more
symbol on
Use at ranges of
No restrictions
No restrictions
No restrictions
No restrictions
Publicidad
Capítulos
