Standard And Angle Mounting Instructions - Harbor Breeze KEYPORT Manual Del Usuario

STANDARD OR ANGLE MOUNTING INSTRUCTIONS
1. Remove the downrod pin (MM) and downrod clip
(LL) from the downrod (A). Then partially loosen the
motor-housing set screws (NN) in the yoke at the top
of the motor assembly (G).
Help Hint: Downrod style mounting is best suited
for ceilings 8 ft. or higher. For taller ceilings you may
want to use a longer downrod (not included). Angle
style mounting is best suited for angled or vaulted
ceilings. A longer downrod is sometimes necessary
to ensure proper blade clearance.
Hardware Used
LL
Downrod Clip
MM
Downrod Pin
Motor Housing
NN
Set Screw
2. Insert the downrod (A) through the canopy (C),
canopy cover (P) and yoke cover (B). Thread the
wires from the motor (G) through the downrod (A).

Note: The canopy cover (P) is preinstalled to the
canopy (C).
1
LL
x 1
x 1
x 2
2
9
A
MM
A
G
Lowes.com/harborbreeze
NN
E
A
C
P
B