Operation - Defiant DF-5936-BK Guía De Uso Y Cuidado

Installation (continued)
Caulking around the light
7
fixture
Caulk around the mounting plate (D) and
mounting surface with silicone sealant (not
included).

Operation

1
Adjusting the lamp heads
Turn the power on at the circuit breaker or fuse
and turn on the wall switch.
If needed, gently grasp the lamp heads (A) and
tilt or rotate them to adjust the light coverage
area.
A
D
2
Setting the sensor for testing
NOTE: When the "LUX" control is set to the " + " position,
the light fixture will operate during the day or night. When
the "TIME" control is set to the " – " position, the light will
stay on for 10 seconds after all motion is stopped.
Grasp the motion sensor (C) housing and rotate
right or left to access the controls.
Set the "LUX" control to the " + " position.
Set the "TIME" control to the " – "
position.
Slide the "SENS" control to the " – "
position.
NOTE: The motion sensor will need to completely warm
up (60 seconds) before beginning the setup process.
7
Please contact 1-866-308-3976 for further assistance.
– + – +
LUX SENS
C
HOMEDEPOT.COM
– +
TIME