Xylem SI Analytics TitroLine 7500KF Manual De Instrucciones página 133

Pressing the Print key will transfer the balance data, too. Titration will then begin directly after the transfer of the
balance data without any further confirmation being necessary.
The display shows either

the use in ml with the drift in µg/min (Fig. 52),

or the drift with the measured value in µA (Fig. 53),

or the titration curve in ml/time [s]
You can switch between the individual displays with <MODE>.
Fig. 52
Fig. 53
Fig. 54
appears (Fig. 54).
133