Maintenance; Recycling - S&P CTB ECOWATT Instrucciones De Uso

Input registers (Read-only)
Register Min.
0 Pote
1 In1
2 In2
3 Interno
4 Rpm
Discrete inputs (Read-only)
Register Min.
0 InD
Output coils (sólo lectura)
Register Min.
0 Output

9. MAINTENANCE

Before manipulating the fan, make sure it is disconnected from the mains supply even if it has previously been switched off.
Prevent the possibility of anyone else connecting it while it is being manipulated.
Fan unit must be regularly inspected. These inspections should be carried out bearing in mind the machine's working condi-
tions, in order to avoid dirt or dust accumulating on blades, impeller, motor or grids. This could be dangerous and perceptibly
shorten the working life of fan unit.
While cleaning, great care should be taken not to unbalance blades or impeller.
All maintenance and repair work should be carried out in strict compliance with each country's current safety regulations.

10. RECYCLING

EEC standard, together with the responsibility we should assume with future generations in mind, oblige us to recycle all the
materials we can. Therefore, please deposit all left-over material and packaging in their corresponding recycling containers
and hand in the replaced machines to the nearest handler of this type of waste product.
Max. Description Default
Potentiometer RV1
0 255
0 255 Analog input 1
0 255 Analog input 2
Internal pressure
0 1250
sensor
0 6000 Motor speed
Max. Description Default
0 1 Digital input
Max. Description Default
0 1
60
Comments
PCB
Comments
Comments
Relay
Comments
Potentiometer RV1
Entrada Analógica 2
Entrada Analógica 2
Internal pressure sensor
Speed motor
(if rpm<100, rpm=0)
Comments
Digital input
Comments
Relay