Using The Seam Guides On The Needle Plate; Turning Square Corners - Janome QS2250 Manual De Instrucciones

q
e
r

Using the seam guides on the needle plate

The seam guides on the needle plate help you measure
seam width.
* The numbers indicate the distance between the
center needle position and the guide line.
Numbers on the needle plate
Distance in centimeters
q
Guide lines
w
Cornering guide
w
e
Needle plate
r
Needle plate hole
t
Seam width from the center needle position

Turning square corners

To turn a square corner 1.6 cm (5/8˝) from the fabric
edge.
When the fabric edge facing you lines up with the
cornering guide as illustrated, stop stitching and lower
the needle by turning the handwheel toward you.
t
Raise the presser foot and turn the fabric to line the
edge with the 1.6 cm (5/8˝) seam guide.
Lower the presser foot and begin stitching in the new
direction.
w
Cornering guide
w
36
10 15 20 3/8˝ 4/8˝ 5/8˝
1.0 1.5 2.0 1.0 1.3 1.6
6/8˝
1.9