Quilting; To Drop Or Raise The Feed Dogs - Singer 384.18024000 Manual De Instrucciones

Tabla de contenido

Publicidad

Quilting
(_ Stitch selector:
Stitch width:
Stitch length:
_) Needle thread tension:
® Presser foot A:
6to 8
6.5
1.5 to 4
2t06
f
I
[
[
Zigzag foot ( _ ...... )
{_) Presser foot H (option): Straight stitch foot ( ,[, only)
NOTE: When using the straight stitch foot, make sure to
set the stitch width control at 0. Otherwise the needle
may strike the presser foot and possibity break.
S
I
I
I
I
I
I
I
I
I
WIDTH
LENGTH
®
®
or
o
ou
The quilter will help to keep the stitching lines straight.
[] Loosen the quilter holding screw.
Slide the quilter in the hole to the desired width and
tighten the screw.
[] Sew, guiding the quilter over the previous row of stitching.
(_ Quilter holding screw
_z_Quilter
(_) Hole
Distance
[]
[]
To Drop or Raise the Feed Dogs
The drop feed dogs lever is located underneath the free
arm bed on the back side of the machine.
(_ To drop the feed dogs, push the lever in the direction of
the arrow as illustrated.
_) To raise the feed dogs, push the lever in the direction of
the arrow as illustrated and turn the handwheel toward
you.
Feed dogs must be up for normal sewing.
41

Publicidad

Tabla de contenido
loading

Tabla de contenido