Adjust
the Needle
Thread
Tension
for Zigzag
Stitch
For an ideal zigzag stitch, the bobbin thread does not show on
the right side (Top side) of the fabric and needle thread shows
slightly on the wrong (Bottom side) side of the fabric.
See the illustrations for correct appearance.
To match this appearance, adjust the needle tension.
• Correct tension
(_ Right side (Top side) of fabric
Wrong side (Bottom side) of fabric
Minimize the amount of needle thread visible on the wrong side
(Bottom side) of fabric without causing excessive puckering or
causing bobbin thread to show on the right
side (Top side) of fabric.
Results vary with fabric, thread and sewing condition.
• Tension
is too tight
(_ Right side (Top side) of fabric
(_) Wrong side (Bottom side) of fabric
Corner of each zigzag pulls together on the right side of fabric.
• Tension
is too loose
(_ Right side (Top side) of fabric
(_ Wrong side (Bottom side) of fabric
The needle thread loops through wrong side (Bottom side) of
fabric and is pulled almost together.
S
S
®
31