Blatchford EliteVT EVT24L11 Instrucciones De Uso página 10

9 Axial Shock Spring Replacement
Remove from foot shell as shown previously
1
Remove rotation stop
3
Withdraw
pylon
Re-lubricate bearing surface with 'Sapphire Endure' (928015) or equivalent PTFE loaded grease if
necessary.
Re-assembly is the reverse of above, note the position and location of anti-rotation pins in the
axial spring and the orientation of the slot in the pylon (posterior). Apply Loctite and apply
torque to screws as shown on page 4.
4
2
Unscrew pyramid
screw to withdraw
pylon.
It may be necessary
to partially unscrew
the pyramid screw as
shown and tap the
screw head gently to
disengage the anti
rotation pins
4
Using a long
reach hex
key wrench,
remove
distal spring
retaining
screw
Note spring rating
10
5
4
938289/8-1219