Technical Data - ProMinent CLE 3-mA Instrucciones De Servicio

15 Technical data

Measured
variable Hypochlorous acid (HOCl)
Probe may not be used in connection with organic chlorine preparations (e.g.
trichlorocyanuric acid) or stabilisers (e.g. isocyanuric acid)!
Application
range Swimming pool water, drinking water or water of a similar quality
Measurement
range
(30 ° C, pH 7.2) CLE 3-mA-0,5 ppm:
CLE 3-mA-2 ppm:
CLE 3-mA-10 ppm:
CLE 3-mA-20 ppm:
CLE 3-mA-50 ppm:
CLE 3-mA-100 ppm:
CLE 3-DMT-5 ppm:
CLE 3-DMT-50 ppm:
CLE 2.2-4P:
pH range pH 5.5...8.0
Temperature
range 5...45 °C (Temperature compensated)
No temperature leaps!
Max. temperature fluctuation speed < 0.3 °C/min
Storage
temperature 5...50 °C
Conductivity
water sample 50 µS/cm - 10,000 µS/cm
Resolution Corresponds to lower measurement range threshold
Max. pressure DGM:
DLG:
Flow DLG III in-line probe housing A/B and/or DGM
Crosssensitivity Di-/Trichloramine, iodine, ClO
Operating life
Membrane cap Typically 1 year depending upon the water quality.
The presence of surfactants will considerably reduce the operating life of the
equipment.
ProMinent
®
0.01...0.5 mg/l
0.02...2 mg/l
0.1...10 mg/l
0.1...20 mg/l
0.5...50 mg/l
1...100 mg/l
0.05...5 mg/l
0.1...50 mg/l
0.1...20 mg/l
1 bar (atmospheric pressure at outlet)
1 bar (atmospheric pressure at outlet)
, ozone and bromine, bromamine
2
Technical data
(nominal slope: 24 mA/ppm)
(nominal slope: 6 mA/ppm)
(nominal slope: 1.2 mA/ppm)
(nominal slope: 0.6 mA/ppm)
(nominal slope: 0.24 mA/ppm)
(nominal slope: 0.12 mA/ppm)
(nominal slope: 65 mV/ppm)
(nominal slope: 6.5 mV/ppm)
(nominal slope: 100 mV/ppm)
No negative pressure!
No negative pressure!
Recommended: 40 - 60 l/h
Minimum:
Maximum:
20 l/h
100 l/h
33