Commissioning; Selecting The Scale Location; Levelling The Scale - Mettler Toledo ICS241 Instrucciones De Manejo

30232251A ICS241
Operating soft keys
➜ Press the key below the desired function.
Changing soft key line
➜ Press the soft key to switch from page 1 to page 2 to page 3 and vice versa.
Possible soft key settings
Symbol Menu setting
Target
Recall
Store
Display
Take away
To zero
ID1
ID2
Reference n
Average piece
weight
APW opt.
Totalize
Log files

1.4 Commissioning

1.4.1 Selecting the scale location

The correct location is important for the accuracy of the weighing results.
➜ Select a stable, vibration-free and horizontal location for the scale.
➜ Observe the following environmental conditions:
– No direct sunlight
– No strong drafts
– No excessive temperature fluctuations

1.4.2 Levelling the scale

Only scales that have been precisely leveled horizontally provide accurate weighing
results. Scales approved by Weights and Measures are equipped with a spirit level to
simplify levelling.
Level the scale as follows:
1. Turn the levelling feet of the scale until the spirit level's air bubble is inside the inner
circle (see picture).
2. Tighten the lock nuts of the levelling feet.
Function
Set checkweighing/checkcounting parameters
Recall article parameters from the database
Store article parameters in the database
Switch display mode
Activate/deactivate Take away mode
Set checkweighing/checkcounting to zero
Enter identification 1
Enter identification 2
Determine the average piece weight
Enter the average piece weight
Average piece weight optimization
Totalizing application
Checkweighing data logs
9
General information