Basic Operation; Switching On And Off; Zeroing/Zero Point Correction; Straight Weighing - Mettler Toledo ICS241 Instrucciones De Manejo

10

Basic operation

2 Basic operation

2.1 Switching on and off

2.1.1 Switching on
➜ Press .
For a few seconds, the device shows a start-up screen with device name, software
version, serial number of the scale and the Geo value.
•
You can freeze the start-up screen by pressing .
•
Press again to unfreeze the screen and return to normal start-up.
2.1.2 Switching off
➜ Press .
Before the display shuts down,

2.2 Zeroing/zero point correction

2.2.1 Manual zeroing
1. Unload scale.
2. Press .
The scale is set to zero.
2.2.2 Automatic zeroing
In the case of non-approved scales, the automatic zero point correction can be deactivated
in the menu or the zero range can be changed. Approved scales are fixed to 0.5 d.
By default, the zero point of the scale is automatically corrected when the scale is unloaded.
•
The zero function is only available within a limited weighing range.
•
After zeroing the scale, the whole weighing range is still available.
•
Zeroing will always delete the tare weight.

2.3 Straight weighing

1. Place the weighing sample on the scale.
Wait until the stability monitor symbol
2. Read the weighing result.
is displayed briefly.
disappears.
ICS241 30232251A