Application; Piece Counting - Mettler Toledo ICS241 Instrucciones De Manejo

14

Application

3 Application

3.1 Piece counting

3.1.1 Piece counting with a fixed number of reference pieces
Prerequisite
9 The corresponding
1. Place the reference parts on the scale.
2. If it is the default number of reference parts, press
Otherwise, enter the number of reference parts and press
n specifies the number of reference piece.
The number of reference pieces is displayed: the value of n.
•
The average piece weight is valid until a new average piece weight is determined.
• The auxiliary line and the info page can be configured to show the average piece
weight.
3.1.2 Piece counting with a known piece weight
Prerequisite
9 The corresponding
1. Press .
Input of the average piece weight (APW) is requested.
2. Enter the average piece weight and confirm with
The weight unit switches to PCS.
soft key is activated in the Terminal menu.
soft key is activated in the Terminal menu.
.
.
.
ICS241 30232251A