Product Specifications; Auxiliary Handle; Features - Ryobi RY803600 Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

PRODUCT SPECIFICATIONS

Engine ............................................................................................................................................................... Honda GX200
Fuel Tank Capacity .................................................................................................................................................... 0.81 gal.
Maximum Pounds Per Square Inch Pressure* ......................................................................................................... 3,600 psi
Maximum Gallons Per Minute* ...................................................................................................................................2.5 gpm
Maximum Inlet Water Temperature ................................................................................................................................104˚F
*Max. rating determined by PWMA Standard 101
KNOW YOUR PRESSURE WASHER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
AUTOMATIC SOAP INJECTION SYSTEM
Place the soap injection hose with filter into your desired
pressure washer detergent to apply detergent quickly and
easily to your cleaning project. Use of the soap nozzle will
activate the soap injector at a 20:1 dilution ratio.

AUXILIARY HANDLE

The auxiliary handle helps prevent loss of control. For ease
of operation, use the handle with either the left or right hand.
The handle can be rotated 360°.
COMPACT STORAGE
The handle can be rotated to the storage position when not
in use to save space.
FUEL TANK
This fuel tank has a maximum capacity of 0.81 gal. Use
unleaded automotive gasoline in the engine.
HONDA GX200 ENGINE
This Honda engine enables the pressure washer to achieve
3,600 psi (pounds per square inch) at a rate of 2.5 gpm
(gallons per minute). Please read the engine manual included
with this product.

FEATURES

HOSE STORAGE
Once the high pressure hose is rolled, hang it on the back
of the machine using the stretch strap to secure in place.
ON/OFF SWITCH
The on/off switch is used in combination with the starter
grip and rope to start the engine. It is also used to turn the
engine off.
SOAP NOZZLE
The blue or black soap nozzle is used to apply detergent at
low pressure only.
STARTER GRIP AND ROPE
The starter grip and rope is pulled to start the machine.
THERMAL RELIEF VALVE
This pump feature will prevent water temperatures from
reaching harmful levels by releasing a small amount of
water. Once the water has drained, the thermal relief valve
will reset itself.
THROTTLE
The pressure washer can be operated at any speed between
idle and full throttle.
TRIGGER HANDLE
The trigger handle has a gripping surface that provides
added control of the spray wand and helps reduce fatigue.
TRIGGER WITH LOCK OUT
Pulling the trigger releases a stream of water for high
pressure cleaning. The lock out provides protection against
unauthorized use.
Page 6 — English

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido