View Freeze Data - Bosch OBD 150 Manual Original

4. Select "Entire Data List" and confirm with E.
"
PID data are displayed.
Fig. 5: Live data display - description from top left to
bottom right
1 PID
2 Note on scrolling
3 Value, status or note
Symbol Function
↑
Scrolling up possible.
↓
Scrolling down possible.
↕
Scrolling up and down possible.
Read and/or erase function can be started.
Select PID with READ or ERASE and
confirm with E.
A signal or value time profile is displayed
for the PID selected.
Tab. 10: Information on scrolling and other functions
5. Select any PID for which the icon
6. Press E to display graph.
"
The graph with the selected sensor or function
is displayed.
i
E can be used to stop signal recording.
Pressing E again re-starts the measurement.
i
Section 9 provides an alphabetical list of PIDs
and what they mean.
Robert Bosch GmbH
All you need to know about OBD | OBD 150 | 39
appears.
5.10

View Freeze Data

This provides an image of the operating and am-
bient conditions at the moment in time at which
the trouble code was first generated. Freeze
frames are however not stored and displayed for
all PID numbers. A list of the PID numbers (pa-
rameter IDs) supported by the OBD 150 is given
in Section 9.
1. Switch on the ignition (position 2).
2. Connect the OBD 150 to the vehicle.
 Data are read.
3. In the diagnostic menu select
"View Freeze Data" with
and confirm with E.
 Trouble codes are displayed.
4. Select the trouble code and confirm with E.
"
Freeze frame data are displayed.
i
Scroll through freeze frame data using
or .
ERASE
569630 Rev "D"
en
or
READ ERASE
READ
|
2016-02-19