Using The Js-10 As A Usb Audio Interfaces; Preparing A Usb Driver; Installing The Usb Driver; Playing Songs On A Pc Through The Js-10 - Boss eBand JS-10 Manual De Instrucciones

Using the JS-10 as a USB Audio
Interfaces
You can use the JS-10 to listen to PC sound via USB and also use the
software on your PC to record the JS-10's sound via USB .

Preparing a USB Driver

Save the USB driver files to your PC .
MEMO
• It is only necessary to install the USB driver on the PC the first
time the driver is used .
• The USB driver file is included on the supplied SD card . The
latest version of the USB driver can be found on the Roland
website .
http://www .roland .com/support/
• You can install the driver on a Mac computer, but it needs to be
a model with an Intel processor .
• If the latest USB driver file is stored on your PC, proceed to
"Installing the USB Driver" (p . 27) .
• The description of computer procedures will use My Computer
(or Computer) with Windows and Finder with the Mac OS .
1.
Follow the procedure in "Changing the Function of the
USB COMPUTER Port" (p . 24) and set USB MODE to "eBand
SONG LIST EDITOR . "
2.
Connect the PC to the JS-10 with a USB cable .
USB port
3.
Using your PC, locate the folders inside "JS-10 EBAND . "
4.
Double-click one of the files shown below .
File Name Supported OS
Win .zip Windows 7, Vista, or XP
Mac .dmg
Mac OS
The contents of the file are displayed .
5.
Copy a "Drivers" folder to your PC .
MEMO
We recommend that you copy to a folder that will be easy to
locate afterward .
6.
7.
8.

Installing the USB Driver

1.
2.
3.

Playing Songs on a PC Through the JS-10

1.
USB COMPUTER port
2.
3.
Disconnect the JS-10 from the PC .
• For Windows 7
In the lower right of your screen, click the [
and then click "Eject JS-10 EBAND . "
• For Windows Vista/XP
In the lower right of your screen, click the [
and then click "Safely remove USB Mass Storage Device . "
• For Mac OS
Drag the "JS-10 EBAND" icon to the eject icon in the Dock .
Press the JS-10's [EXIT] button .
The message "Are you sure?" appears .
To end the connection, press the [ENTER] button on the
JS-10 .
Installation of the USB driver is done by using the USB driver file
stored in your PC .
Disconnect the USB cable from the JS-10 .
Follow the procedure in "Changing the Function of the
USB COMPUTER Port" (p . 24) and set USB MODE to "AUDIO . "
A folder containing the USB driver will be created .
Read the "Readme .htm" file found in the created folder
and install the driver as directed .
You can play songs on a PC and use the JS-10's speakers to listen to
them .
Follow the procedure in "Changing the Function of the
USB COMPUTER Port" (p . 24) and set USB MODE to "AUDIO . "
Connect the PC to the JS-10 with a USB cable .
Set the JS-10 as the output destination for audio played
back by the PC's audio playback software .
MEMO
For instructions on how to switch the audio output destination,
refer to the user's guide for the software you are using .
Convenient Functions

] icon [ ] icon,
] icon ([ ] in XP)
27