Appendices
FLANGER
The flanging effect gives a twisting, jet-airplane-like character to
the sound .
Parameter/
Explanation
Range
RATE
0–100 (*)
This sets the rate of the flanging effect .
DEPTH
0–100
Determines the depth of the flanging effect .
RESONANCE
Determines the amount of resonance (feedback) .
0–100
Increasing the value will emphasize the effect, creating
a more unusual sound .
MANUAL
Adjusts the center frequency at which to apply the
0–100
effect .
CHORUS
In this effect, a slightly detuned sound is added to the original
sound to add depth and breadth .
Parameter/
Explanation
Range
MODE
Selection for the chorus mode .
This chorus effect outputs the same sound from both L
MONO
channel and R channel .
This is a stereo chorus effect that adds different chorus
ST1
sounds to L channel and R channel .
This stereo chorus uses spatial synthesis, with the direct
ST2
sound output in the L channel and the effect sound
output in the R channel .
RATE
0–100 (*)
Adjusts the rate of the chorus effect .
DEPTH
Adjusts the depth of the chorus effect .
0–100
To use it for doubling effect, set the value to 0 .
EFFECT LEVEL
0–100
Adjusts the volume of the effect sound .
TREMOLO
Tremolo is an effect that creates a cyclic change in volume .
Parameter/
Explanation
Range
RATE
0–100 (*)
Adjusts the frequency (speed) of the change .
DEPTH
0–100
Adjusts the depth of the effect .
WAVE SHAPE
Adjusts changes in volume level .
0–100
A higher value will steepen wave's shape .
34
ROTARY
This produces an effect like the sound of a rotary speaker .
Parameter/
Explanation
Range
RATE
0–100 (*)
Adjust the rotation speed .
UNI-V (Uni-Vibe)
This models a Uni-Vibe .
Although this resembles a phaser effect, it also provides a unique
undulation that you can't get with a regular phaser .
Parameter/
Explanation
Range
RATE
0–100 (*)
Adjusts the rate of the UNI-V effect .
DEPTH
0–100
Adjusts the depth of the UNI-V effect .
PAN
With the volume level of the left and right sides alternately
changing, when playing sound in stereo, you can get an effect that
makes the guitar sound appear to fly back and forth between the
speakers .
Parameter/
Explanation
Range
RATE
0–100 (*)
Adjusts the frequency (speed) of the change .
DEPTH
0–100
Adjusts the depth of the effect .
WAVE SHAPE
Adjusts changes in volume level .
0–100
A higher value will steepen wave's shape .