Technical Data; Functional Description; Intended Use - Festool TSC 55 REB Manual De Instrucciones

English
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from chemically
treated lumber.
The risk from these exposures varies, depend­
ing on how often you do this type of work. To re­
duce your exposure to these chemicals: work in
a well ventilated area, and work with approved
safety equipment, such as dust masks that are
specially designed to filter out microscopic par­
ticles. Wash hands after handling.
WARNING
TO REDUCE THE RISK OF INJURY, USER
MUST READ INSTRUCTION MANUAL.
4

Technical data

Cordless plunge-cut saw
Motor voltage
Speed (idle) 1 x 18 V
Speed (idle) 2 x 18 V
Inclination
Cutting depth at 0°
Cutting depth at 45°
Saw blade dimensions
Weight without battery
pack
5

Functional description

[1-1] Handles
[1-2] Rotary knobs for angle adjustment
[1-3] Angle scale
[1-4] Lever for changing blades
[1-5]
Switch-on lock
[1-6] On/Off switch
[1-7]
Extractor connector
12
TSC 55 REB
14.4 - 2 x 18 V
2650 - 3800 min
-1
2650 - 5200 min
-1
-1° to 47°
0 - 2-1/8"
(0 - 55 mm)
0 - 1-11/16"
(0 - 43 mm)
6-1/4 x 1/8 x 3/4"
(160 x 2.2 x 20 mm)
8.2 lbs (3.7 kg)
[1-8] Release buttons for undercuts -1° to
47°
[1-9] Adjustable jaws
[1-10] Speed control
[1-11] Battery packs
[1-12] Capacity display
[1-13] Button for releasing the battery pack
[1-14] Split scale for cutting depth stop
(with/without guide rail)
[1-15] Cutting depth adjusting screw for re­
sharpened saw blades
[1-16] Cutting depth stop
[1-17] Cut indicator
[1-18] Viewing window / chipguard
[1-19] Splinterguard
The pictures for the functional description are
on a fold-out page at the beginning of the in­
struction manual. While reading the manual
you can fold out the page for comparison and
quick reference.
Accessories shown or described are not always
included in the scope of delivery.
6

Intended use

Cordless circular saws are designed for sawing
wood, materials similar to wood, plaster and
cement-bonded fibre materials and plastics.
When fitted with the special saw blades for alu­
minium that are offered by Festool, these ma­
chines can also be used for sawing aluminium.
Only use saw blades with the following dimen­
sions:
– Saw blade according to EN 847-1
– Saw blade diameter 6-1/4" (160 mm)
– cutting width 3/32" (2.2 mm)
– location hole 25/32" (20 mm)
– standard blade thickness max. 1/16"
(1.8 mm)
– suitable for speeds of up to 9500 min
Never use machine with any abrasive wheels.
Only saw materials for which the relevant saw
blade has been designed.
This power tool may only be used by experts or
instructed persons.
The user is liable for improper or non-in­
tended use.
-1